Handling, setting
The combination lock is factory set to the code 0-0-0-0-0.
1. Set the opening code and pull apart the padlock.
2. Inside the pulled-out part, you will find a reset knob, turn it clockwise 90 degrees (to the 3 o'clock position).
3. Set the desired opening code on the number lock (it's worth writing it down somewhere so that you have it later).
4. Turn the reset knob counterclockwise to its original position (to the 12 o'clock position).
5. Plug the padlock together and it can be used with the new combination from here on.
If you want to change the opening code in the future, repeat steps 1-5.
